A4985SLPTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 8V-35V SUPPLY |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A4985 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Logic |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1A |
| Supply Current-Max (Isup) | 8mA |
| Voltage - Load | 8V~35V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
A4985SLPTR-T Overview
Drivers controllers is designed with Tape & Reel (TR) package.The part is packaged in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad case.Drivers controllers is recommended to mount the part by Surface Mount.The component connected in General Purposematches it perfectly.The device can supply 3V~5.5V volts.Drivers controllers operates wDrivers controllershin a range of -20°C~150°C TJdegrees Celsius.A total of 24terminations are available in this part.Voltage can be applied at a rate of 8V~35V volts to the load.The amplifier should be set to 3.3V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Maintain a current of 1A for the part output.Using the A4985part number, it is located.A device with 24pins is available.Drivers controllers is part of the series [0].There are 1 outputs available.In this case, the output voltage is kept at 35V volts.A motor type of Steppercan be recognized.Controller ic has also been assigned the characteristic [0].
A4985SLPTR-T Features
Applications : General Purpose
Load voltage across the chip 8V~35V
base on A4985 number
designed with 1 outputs
Motor Type classified as Stepper
Additional Feature: ALSO OPERATES WITH THE RANGE OF 8V-35V SUPPLY
A4985SLPTR-T Applications
There are a lot of Allegro MicroSystems A4985SLPTR-T motor drivers applications.
- Monitoring the energy that the luminaire uses
- Telltale lights
- Lighting for health and wellbeing
- CHMSL (center high-mount stop lamps)
- Emergency lighting
- High brightness LED lighting
- Outdoor area lights
- Matrix LED dimmers
- Indicator
- Accurate LED current matching
