A6273KA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.3Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | NMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6273 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 750mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Strobe, Parallel |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 50V Max |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 1.3 Ω |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6273KA Overview
As a result, it is packaged in the form of a Tube.The 20-DIP (0.300, 7.62mm) package includes it.It has been mounted as Through Hole on the LED driver.There is a Latched Driver switch type associated with it.It is recommended to set the temperature to -40°C~125°C TA in order to ensure reliable operation.By default, it is set to output 8.In order to operate, it requires a voltage supply of 4.5V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.The A6273 family consists of this type.There are 20 terminations in it.The LED driving board has a total of 8 functions.The maximum output current is reduced to 750mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The LED driving board is mounted in the way of Through Hole.In total, it has 20 pins.Lighting drivers with 1.3Ohm resistance are used.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).Normal operation requires Vsup above 4.5V.
A6273KA Features
Supplied from 5V
Resistance of 1.3Ohm
A6273KA Applications
There are a lot of Allegro MicroSystems A6273KA Power Switches ICs applications.
- Gaming
- PC Card Hot Swap
- Set-Top Boxes
- Wireless/Networking Cards
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- Portable Devices
- Portable Music Players
- HDD and SSD
- Wireless Headsets
