A6273KLW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.3Ohm |
| Terminal Finish | TIN LEAD |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6273 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | N-Channel |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Interface | Strobe, Parallel |
| Output Configuration | Low Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Propagation Delay | 625 ns |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 50V Max |
| High Level Output Current | -250mA |
| Low Level Output Current | 250mA |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 1.3 Ω |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6273KLW Overview
The LED driver's packaged as a Tube.This file is included in package 20-SOIC (0.295, 7.50mm Width).The lighting driver has the mounting type Surface Mount.A Latched Driver switch type is owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TA.It is possible to use 8 outputs in the lighting driver.A voltage of 4.5V~5.5V is used to power it.There is a maximum output voltage of N-Channel volts.I believe it belongs to the A6273 family.It contains 20 terminations.20 pins are used for operation.It is important to note that the LED driving board has 8 functions.As a result, the maximum output current is reduced to 750mA in order to meet the operation requirements.Supply voltages of 5V allow for high efficiency.It is positioned in the direction of Surface Mount.In total, it has 20 pins.In this case, there is 1.3Ohm resistance in the LED driving board.The output current is set to 250mA in this case.In order to optimize the efficiency of the supply voltage, it should be set to 5V.There are 1 elements in total.
A6273KLW Features
Supplied from 5V
Resistance of 1.3Ohm
A6273KLW Applications
There are a lot of Allegro MicroSystems A6273KLW Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- Portable GPS
- USB Protection
- PDAs
- Wireless Modem Data Cards
- Telecom and Network Systems
- USB3.1 Power Delivery
- USB Power Distribution
- Mobile Communication Devices
