A6275EA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN LEAD |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6275 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 24mA |
| Output Current | 90mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 60mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 10 MHz |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 5.33mm |
| Length | 19.175mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6275EA Overview
16-DIP (0.300, 7.62mm) package saves space on the board. The LED driver's design uses 8 outputs.Through Hole is used for mounting.When it emerges as a Linear, it shows high-performance and reliability.It is capable of operating at a temperature of -40°C~85°C TA. Frequency 20MHz is the basis of operation.It operates using 16 terminations.It has a base configuration of 16 pins.The voltage supply can fail if it is below 4.5V.The segment count is 8.It's mounted by Through Hole.It can be found under the part number A6275.It is acceptable to have a maximum voltage of 5.5V.The voltage at the output terminal is 4V.On this device, there are 16 pins.In addition to Display Drivers, it is also classified by its characteristics.For highest efficiency, it works with a minimal supply voltage of 4.5V.It is possible to supply the load with 90mA current.In order to power systems, 5V voltage is needed.
A6275EA Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
A6275EA Applications
There are a lot of Allegro MicroSystems A6275EA LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Museum lighting
- Sports Facility Lighting
- LED backlight driver for LCD displays for portable equipment
- Replacement lamps
- LED Lightings for Industrial Equipment
- General lighting
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- Medical surgery lighting
