A6275EA-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | COMMON-ANODE |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6275 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 90mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 24mA |
| Output Current | 90mA |
| Max Output Voltage | 17V |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 8 |
| Switching Frequency | 10MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 5.33mm |
| Length | 19.05mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
A6275EA-T Overview
The 16-DIP (0.300, 7.62mm) package saves space on the board. The LED driver's design uses 8 outputs.To mount, use Through Hole.With high efficiency, it emerges as a Linear.-40°C~85°C TA is the operating temperature of the led driver.The frequency of 20MHz is used as the basis for its operation.There are 16 terminations that are designed to operate with it.To form its configuration, 16 pins are used.A total of 8 segments have been created.It is mounted in the way of Through Hole.LED drivers can be found under the base part number A6275.It's acceptable for the voltage to be 5.5V.A voltage of 4V is produced by it.The device has a pin count of 16.Further, it can be classified as Display Drivers based on its characteristics.It operates at a voltage of 4.5V as its minimal input voltage.The system works with a minimum supply voltage of 4.5V in order to achieve maximum efficiency.The maximum supply current is reached when 5.5V is reached.A load can be supplied with 90mA current.In order to power systems, 5V voltage is needed.This electronic component can fully perform when the switching frequency is 10MHz.A LED driver that operates at 90mA output current provides all the benefits of a LED driver.Ideally, the output voltage should not exceed 17V.Moreover, this LED driver contains a COMMON-ANODE.
A6275EA-T Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 10MHz
COMMON-ANODE
A6275EA-T Applications
There are a lot of Allegro MicroSystems A6275EA-T LED Driver ICs applications.
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for portable equipment
- Other Electronic Devices
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for Tablets and Note PCs
- Dimmable LED for vehicle interiors
- OLED power supply for portable equipment
- High-end retail lighting
- LED Lightings for Inspection Devices
