A6275ELW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN LEAD |
| Additional Feature | COMMON-ANODE |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6275 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 24mA |
| Output Current | 90mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Drivers | 1 |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6275ELW Overview
To save board space, it uses the 16-SOIC (0.295, 7.50mm Width) package. These LED drivers have 8 outputs.For mounting, it uses the Surface Mount method.When it emerges as a Linear, it performs extremely well and is highly reliable.The led light driver can work at -40°C~85°C TA.In the 20MHz frequency range, it operates.In this case, the terminations are set to 16.The configuration of the board is built around 16 pins.A voltage supply less than 4.5V could result in undetermined failures.It consists of 8 segments.It has been mounted on Surface Mount.Under the base part number A6275, you'll find this LED driver.In this case, 5.5V is acceptable.A voltage output of 4V is provided by this device.16 pins are available on the device.Furthermore, it can be categorized as Display Drivers based on its characteristics.The maximum efficiency can be achieved by operating it at a minimal voltage of 4.5V.There is no current available to supply to the load.It is necessary to have 5V voltages inside systems to power them.This LED driver is also characterized by the number COMMON-ANODE.
A6275ELW Features
Available in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
COMMON-ANODE
A6275ELW Applications
There are a lot of Allegro MicroSystems A6275ELW LED Driver ICs applications.
- High-end retail lighting
- Auxiliary lights for on-vehicle cameras
- Stage Lighting and Signage
- LED Lightings for Industrial Equipment
- Replacement lamps
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- A- lamps
- OLED power supply for portable equipment
- Architectural lighting
- LED Lightings for Inspection Devices
