A6275ELWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN LEAD |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6275 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 24mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 10 MHz |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6275ELWTR Overview
It saves board space with the 16-SOIC (0.295, 7.50mm Width) package. LED drivers have a total of 8 outputs that are used in the design of the drivers.In this case, mounting method is Surface Mount.This emerges as a Linear with high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.This system operates at 20MHz frequency.16 terminations are designed for its operation.There are 16 pins used to form the base of its configuration.It is inevitable that there will be undetermined failures when the supply voltage is less than 4.5V.It is estimated that there are 8 segments.The device has been mounted on the Surface Mount.It can be found under the part number A6275.The supply voltage of 5.5V is an acceptable maximum value.The output voltage is 4V.A device with 16 pins is available.Additionally, it is categorized into Display Drivers according to its characteristics.A minimal supply voltage of 4.5V is required for it to achieve the highest efficiency.Powering systems requires 5V voltages.
A6275ELWTR Features
Available in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
A6275ELWTR Applications
There are a lot of Allegro MicroSystems A6275ELWTR LED Driver ICs applications.
- Down lighting
- OLED power supply for portable equipment
- LED headlights
- Sports Facility Lighting
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Dimmable LED for vehicle interiors
- Street lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Stage Lighting and Signage
