A6275ELWTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | COMMON-ANODE |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6275 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 24mA |
| Output Current | 90mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 8 |
| Switching Frequency | 10MHz |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height | 2.35mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
A6275ELWTR-T Overview
There is also a 16-SOIC (0.295, 7.50mm Width) package that is used to save space on the board. LED drivers use 8 outputs for their design.It adopts the way of Surface Mount for mounting.It emerges as a Linear with high efficiency.This LED driver can be operated at a temperature of -40°C~85°C TA. The frequency of 20MHz determines how it operates.There are 16 terminations associated with it.To form its configuration, 16 pins are used.A voltage supply less than 4.5V could result in undetermined failures.It consists of 8 segments.On the Surface Mount, a device is mounted.The LED driver is available under the part number A6275.5.5V is a reasonable voltage.The output voltage is 4V.This device contains 16 pins.Additionally, it is categorized into Display Drivers according to its characteristics.As a result, it is designed to operate at a minimal voltage of 4.5V to ensure the most efficiency possible.Loads can only be powered by 90mA current.In order for systems to function, a voltage of 0 is required internally.This electronic component can fully perform its functions when the switching frequency is kept at 10MHz.A further characteristic of this LED driver is that it is COMMON-ANODE.
A6275ELWTR-T Features
Available in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 10MHz
COMMON-ANODE
A6275ELWTR-T Applications
There are a lot of Allegro MicroSystems A6275ELWTR-T LED Driver ICs applications.
- Panel lighting
- Architectural lighting
- Replacement lamps
- Auxiliary lights for on-vehicle cameras
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Portable lighting
- Refrigeration lighting
- Sports Facility Lighting
- Dimmable LED for vehicle interiors
- Linear fluorescent
