A6275SLW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN LEAD |
| Additional Feature | COMMON-ANODE |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6275 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 24mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 10 MHz |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6275SLW Overview
16-SOIC (0.295, 7.50mm Width) saves board space. LED drivers are designed with 8 outputs.Surface Mount is used for mounting.With high efficiency, it emerges as a Linear.-20°C~85°C TA is the operating temperature of the led driver.Frequency 20MHz is the basis of operation.In this case, the termination value is 16.To form its configuration, there are 16 pins.Undetermined failures can occur if the voltage supply is below 4.5V.A total of 8 segments are estimated.The device has been mounted on the Surface Mount.The LED driver can be found under the base part number A6275.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.The voltage at the output terminal is 4V.This device contains 16 pins.Depending on its characteristics, it is classified into Display Drivers.The system works with a minimum supply voltage of 4.5V in order to achieve maximum efficiency.The internal voltages needed to power systems is 5V.Furthermore, this LED driver has a COMMON-ANODE characteristic.
A6275SLW Features
Available in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
COMMON-ANODE
A6275SLW Applications
There are a lot of Allegro MicroSystems A6275SLW LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- General lighting
- Panel lighting
- White LED Backlight for portable equipment
- High-end retail lighting
- Amusement Machines
- LED backlight driver for LCD displays for portable equipment
- Linear fluorescent
- Down lights
- Gallery lighting
