A6275SLW-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | COMMON-ANODE |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6275 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 24mA |
| Output Current | 75.5mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 10 MHz |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6275SLW-T Overview
The board's 16-SOIC (0.295, 7.50mm Width) package saves space. LED drivers are designed with 8 outputs.The mounting method is Surface Mount.In this case, the result is a Linear with high efficiency.If the led driver ic is set to -20°C~85°C TA, it will work normally.In this case, the frequency is 20MHz.A termination of 16 is used to operate the LED driver.It is configured with 16 pins as its base.Failures may occur if the voltage supply is below 4.5V.The segment count is 8.There is a mounting of it by Surface Mount.LED drivers have a base part number of A6275.Ideally, the supply voltage should be 5.5V.In this device, the output voltage is 4V volts.It consists of 16 pins.As a result, its characteristics can also be categorized as Display Drivers.With a minimal supply voltage of 4.5V, it reaches the highest efficiency levels.The current that can be supplied to the load is 75.5mA.It is necessary to power systems with a voltage of 5VAs a result, this LED driver has a COMMON-ANODE characteristic.
A6275SLW-T Features
Available in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
COMMON-ANODE
A6275SLW-T Applications
There are a lot of Allegro MicroSystems A6275SLW-T LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- A- lamps
- Portable lighting
- White LED Backlight for portable equipment
- General lighting
- Down lights
- Down lighting
- Stage Lighting and Signage
- Medical surgery lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
