A6275SLWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN LEAD |
| Additional Feature | COMMON-ANODE |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6275 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 24mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 10 MHz |
| Number of Segments | 8 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6275SLWTR Overview
Space is saved using its 16-SOIC (0.295, 7.50mm Width) package. As part of the design of this LED driver, there are 8 outputs that have been used.Mounting is done according to the Surface Mount method.With high efficiency, it appears as a Linear.If the led driver ic is set to -20°C~85°C TA, it will work normally.As a result, it operates in accordance with the frequency of 20MHz.It operates with terminations of 16.The LED light driver has a base configuration of 16 pins.It is possible that failures will occur if the voltage supply is below 4.5V.Based on our estimates, there are 8 segments.There is a mounting of it by Surface Mount.The base part number for this LED driver is A6275.A maximum supply voltage of 5.5V is acceptable.A voltage output of 4V is provided by this device.There are 16 pins on it.Additionally, it is categorized into Display Drivers according to its characteristics.It achieves maximum efficiency with a minimal voltage supply of 4.5V.The internal voltages needed to power systems is 5V.Aside from that, it has COMMON-ANODE as a characteristic.
A6275SLWTR Features
Available in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
COMMON-ANODE
A6275SLWTR Applications
There are a lot of Allegro MicroSystems A6275SLWTR LED Driver ICs applications.
- Linear fluorescent
- Refrigeration lighting
- OLED power supply for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Gallery lighting
- Replacement lamps
- Street lighting
- Auxiliary lights for on-vehicle cameras
- LED Lightings for Industrial Equipment
- Architectural lighting
