A6276EA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN LEAD |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6276 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 32mA |
| Output Current | 75.5mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| fmax-Min | 10 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 5.33mm |
| Length | 31.875mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6276EA Overview
In order to save board space, the 24-DIP (0.300, 7.62mm) package is used. For the design of this LED driver, 16 outputs are used.The mounting method adopted is Through Hole.It is highly reliable and high-performing when it emerges as a Linear.The led light driver can work at -40°C~85°C TA.The system operates at a frequency of 20MHz.It operates with 24 terminations.To form its configuration, there are 24 pins.Undetermined failures can occur if the voltage supply is below 4.5V.A total of 16 segments are estimated.There is a mounting of it by Through Hole.Under the base part number A6276, you'll find this LED driver.5.5V is an acceptable voltage.The output voltage of the device is 4V.24 pins are on the device.Furthermore, it can be categorized as Display Drivers based on its characteristics.A minimum supply voltage of 4.5V is required to meet the highest efficiency standards.75.5mA is the maximum current the load can handle.The power of systems depends on having 5V voltages inside.
A6276EA Features
Available in the 24-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
A6276EA Applications
There are a lot of Allegro MicroSystems A6276EA LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Industrial LED Lighting: Image Recognition Devices
- Museum lighting
- Scanners and Handy Terminals
- Linear fluorescent
- Refrigeration lighting
- Portable lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lighting PFCs, Linear Dimmable
- Stage and Studio lighting
