A6276EA-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | COMMON-ANODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6276 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 32mA |
| Output Current | 75.5mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| Number of Segments | 16 |
| Switching Frequency | 10MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 5.33mm |
| Length | 30.1mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
A6276EA-T Overview
24-DIP (0.300, 7.62mm) saves board space. A LED driver using this design has 16 outputs.It is mounted using Through Hole.When it emerges as a Linear, it performs extremely well and is highly reliable.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.The frequency of 20MHz is used as the basis for its operation.In this case, it operates with terminations of 0.This module has 24 pins as its base.The number of segments is 16.This is mounted by Through Hole.A6276 is the base part number for this LED driver.It is acceptable for the voltage to be 5.5V.The device has a voltage output of 4V volts.This device contains 24 pins.It is also classified into Display Drivers according to its characteristics.This device requires a minimum voltage of 4.5V volts.It achieves maximum efficiency with a minimal voltage supply of 4.5V.In the presence of a maximum supply current, the value of 5.5V will be reached.75.5mA is the maximum amount of current that can be supplied to the load.Powering systems requires an internal voltage of 5V.As long as the switching frequency is maintained at 10MHz, this electronic component is able to perform all of its functions properly.Furthermore, this LED driver has a COMMON-ANODE characteristic.
A6276EA-T Features
Available in the 24-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 10MHz
COMMON-ANODE
A6276EA-T Applications
There are a lot of Allegro MicroSystems A6276EA-T LED Driver ICs applications.
- Stage and Studio lighting
- Portable lighting
- Other Electronic Devices
- Scanners and Handy Terminals
- LED Lighting PFCs, Linear Dimmable
- LED Lightings for Industrial Equipment
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for portable equipment
- Auxiliary lights for on-vehicle cameras
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
