A6276ELP
| Parameters | |
|---|---|
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN LEAD |
| Additional Feature | COMMON-ANODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6276 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Current - Output / Channel | 75.5mA |
| Internal Switch(s) | Yes |
| fmax-Min | 10 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
A6276ELP Overview
To save space on the board, it has a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. LED drivers design with 16 outputs.In order to mount the led light driver, Surface Mount is used.In this case, the result is a Linear with high efficiency.If the led driver ic is set to -40°C~85°C TA, it will work normally.On the basis of the frequency 20MHz, it operates.A termination of 24 is used to operate the LED driver.It is possible for undetermined failures to occur if the voltage supply falls below 4.5V.The number of segments is estimated to be 16.The device has been mounted on the Surface Mount.This LED driver can be found under the base part number A6276.The supply voltage of 5.5V is an acceptable maximum value.4V is the voltage output.A device with 24 pins is available.Moreover, it can be classified as Display Drivers due to its characteristics.Moreover, this LED driver is characterized by COMMON-ANODE.
A6276ELP Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
COMMON-ANODE
A6276ELP Applications
There are a lot of Allegro MicroSystems A6276ELP LED Driver ICs applications.
- Linear fluorescent
- Flicker-free LED Lighting using R1580N
- Museum lighting
- LED Lightings for Industrial Equipment
- Architectural lighting
- Down lights
- LED Lightings for Inspection Devices
- Refrigeration lighting
- Portable lighting
- Replacement lamps
