A6276ELW-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6276 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 90mA |
| Max Output Voltage | 17V |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| Number of Segments | 16 |
| Switching Frequency | 10MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6276ELW-T Overview
There is also a 24-SOIC (0.295, 7.50mm Width) package that is used to save space on the board. For the design of these LED drivers, 16 outputs are used.It adopts the way of Surface Mount for mounting.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.The led light driver operates normally at -40°C~85°C TA. It operates at 20MHz frequency.The system operates with a termination of 0.It is configured with 24 pins as its base.It is estimated that there are 16 segments.There is a device mounted on the Surface Mount.Under the base part number A6276, you will find this LED driver.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.4V is the output voltage.In this device, there are 24 pins.It is also classified into Display Drivers according to its characteristics.As its minimal input voltage, it operates at a voltage of 4.5V.The system works with a minimum supply voltage of 4.5V in order to achieve maximum efficiency.5.5V is the maximum value of the supply current.You can supply 90mA current to the load.When the switching frequency is maintained at 10MHz, this electronic component is able to fully play its functions.Voltages should not exceed 17V volts at the output.
A6276ELW-T Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Switching frequency of 10MHz
A6276ELW-T Applications
There are a lot of Allegro MicroSystems A6276ELW-T LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Industrial LED Lighting: Image Recognition Devices
- Stage Lighting and Signage
- Street lighting
- Down lighting
- Dimmable LED for vehicle interiors
- LED Lightings for Industrial Equipment
- Amusement Machines
- White LED Backlight for portable equipment
- Auxiliary lights for on-vehicle cameras
