A6276SA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | TIN LEAD |
| Additional Feature | COMMON-ANODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6276 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 32mA |
| Output Current | 90mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| fmax-Min | 10 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 5.33mm |
| Length | 31.875mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6276SA Overview
Its 24-DIP (0.300, 7.62mm) package is used to save board space. LED drivers design with 16 outputs.It is possible to mount the led driver using Through Hole.It emergys as a Linear with high efficiency and reliable performance.The led light driver is capable of operating at the operating temperature of -20°C~85°C TA.A frequency of 20MHz is used to operate it.In this case, the terminations are set to 24.The LED light driver has a base configuration of 24 pins.Undetermined failures may occur if the voltage supply falls below 4.5V.The number of segments is estimated to be 16.The device has been mounted on the Through Hole.Under the base part number A6276, you will find this LED driver.The voltage of 5.5V is acceptable.It produces a voltage of 4V volts.The device has 24 pins.Moreover, it can be classified as Display Drivers due to its characteristics.A minimal supply voltage of 4.5V is required for it to achieve the highest efficiency.It is possible to supply the load with 90mA current.It is necessary to power systems with a voltage of 5VAdditionally, this LED driver has a COMMON-ANODE.
A6276SA Features
Available in the 24-DIP (0.300, 7.62mm) package
Operating temperature of -20°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
COMMON-ANODE
A6276SA Applications
There are a lot of Allegro MicroSystems A6276SA LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Down lights
- Replacement lamps
- Other Electronic Devices
- Constant Voltage Power Source for portable equipment
- High-end retail lighting
- OLED power supply for portable equipment
- A- lamps
- Portable lighting
- Industrial LED Lighting: Image Recognition Devices
