A6279EETTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6279 |
| Pin Count | 28 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Output Voltage | 17V |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 32mA |
| Output Current | 90mA |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| Number of Segments | 16 |
| Switching Frequency | 25MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
A6279EETTR-T Overview
Its 28-VFQFN Exposed Pad package is used to save board space. In this LED driver, there are 16 outputs.Surface Mount is used to mount the led driver.As a Linear, it has high efficiency and reliability.It is capable of operating at a temperature of -40°C~85°C TA. In this case, the termination value is 28.It has a base of 28 pins.A voltage supply below 3V may cause undetermined failures.The segment count is 16.As you can see, it is mounted by Surface Mount.Under the base part number A6279, you'll find this LED driver.It is acceptable to supply voltages of 5.5V volts.In this device, there are 28 pins.Furthermore, it can be classified as Display Drivers based on its characteristics.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.There is no current available to supply to the load.Systems require 5V voltage to operate.The electronic component can function fully when the switching frequency is maintained at 25MHz.It has a voltage of 17V.
A6279EETTR-T Features
Available in the 28-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 25MHz
Output voltage of 17V
A6279EETTR-T Applications
There are a lot of Allegro MicroSystems A6279EETTR-T LED Driver ICs applications.
- Gallery lighting
- Auxiliary lights for on-vehicle cameras
- Stage Lighting and Signage
- LED headlights
- Portable lighting
- Refrigeration lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Industrial LED Lighting: Image Recognition Devices
- Museum lighting
- Constant Voltage Power Source for portable equipment
