A6279ELP-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6279 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Output Voltage | 17V |
| Operating Supply Voltage | 5V |
| Number of Channels | 21 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 32mA |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6279ELP-T Overview
Using its 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, it is possible to save board space. In this LED driver, there are 16 outputs.The mounting method adopted is Surface Mount.It emergys as a Linear with high efficiency and reliable performance.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.On the basis of the frequency 25MHz, it operates.The terminations 24 are designed for its operation.To form its configuration, 24 pins are used.If the voltage supply is lower than 3V, undetermined failures may occur.16 segments exist.The mount is in the way of Surface Mount.The LED driver can be found under the base part number A6279.5.5V is a reasonable voltage.The device has 24 pins.According to its characteristics, it is also categorized into Display Drivers.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.In order for systems to function, a voltage of 0 is required internally.There is 17V voltage at the output terminal.A total of 21 transmission channels are available.
A6279ELP-T Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 25MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Output voltage of 17V
A6279ELP-T Applications
There are a lot of Allegro MicroSystems A6279ELP-T LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- LED backlight driver for LCD displays for portable equipment
- LED Lightings for Inspection Devices
- Scanners and Handy Terminals
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lights
- OLED power supply for portable equipment
- White LED Backlight for portable equipment
- Constant Voltage Power Source for portable equipment
- Refrigeration lighting
