A6279ELPTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6279 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Output Voltage | 17V |
| Operating Supply Voltage | 5V |
| Number of Channels | 21 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 32mA |
| Output Current | 90mA |
| Max Supply Current | 32mA |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Data Input Mode | SERIAL |
| Height | 1.05mm |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6279ELPTR-T Overview
The 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package conserves board space. For the design of these LED drivers, 16 outputs are used.Surface Mount represents this mounting method.It is highly performing and reliable when it emerges as a Linear.It is able to work normally at the operating temperature of -40°C~85°C TA.The frequency of 25MHz determines how it operates.In this case, it operates with terminations of 0.There are 24 pins used to form the base of its configuration.The voltage supply can fail if it is below 3V.16 segments exist.This is mounted by Surface Mount.There is a base part number A6279 for this LED driver.It is acceptable to have a maximum voltage of 5.5V.There are 24 pins on this device.Additionally, it is categorized into Display Drivers according to its characteristics.To meet high efficiency standards, it works with a voltage of 3V.When the maximum supply current is less than 32mA, the device is able to provide a high level of efficiency.There is no current available to supply to the load.Powering systems requires 5V voltages.A 17V voltage is output by it.Currently, there are 21 channels available for transmission.
A6279ELPTR-T Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 25MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Output voltage of 17V
A6279ELPTR-T Applications
There are a lot of Allegro MicroSystems A6279ELPTR-T LED Driver ICs applications.
- Replacement lamps
- Flicker-free LED Lighting using R1580N
- Panel lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED headlights
- Museum lighting
- A- lamps
- LED backlight driver for LCD displays for Tablets and Note PCs
- High-end retail lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
