A6280EA-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 5MHz |
| Base Part Number | A6280 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 15mA |
| Voltage - Output | 1V~3V |
| Topology | Shift Register |
| Output Current per Channel | 150mA |
| Internal Switch(s) | Yes |
| fmax-Min | 6 MHz |
| Dimming | PWM |
| Number of Segments | 3 |
| Voltage - Supply (Min) | 4.75V |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Data Input Mode | SERIAL |
| Length | 19.05mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
A6280EA-T Overview
To save space on the board, it has a 16-DIP (0.300, 7.62mm) package. Using this LED driver, there are 3 outputs.We are using Through Hole as the mounting method.When it emerges as a Linear, it performs extremely well and is highly reliable.It is possible for the led driver ic to operate normally at -40°C~85°C TA.There are many benefits for Lighting.It operates on the basis of the frequency of 5MHz.The terminations 16 are designed for its operation.It has a base configuration of 16 pins.If the voltage supply is less than 4.75V, undetermined failures will occur.Segments counted are 3.There is a mounting of it by Through Hole.A base part number of A6280 is associated with this LED driver.It is acceptable for the voltage to be 17V.The output voltage of this device is 1V~3V.The device has 16 pins.Depending on its characteristics, it is classified into Display Drivers.As a result, it runs at a minimal voltage of 4.75V in order to achieve the best efficiency.
A6280EA-T Features
Available in the 16-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Frequency of 5MHz
A6280EA-T Applications
There are a lot of Allegro MicroSystems A6280EA-T LED Driver ICs applications.
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Industrial LED Lighting: Image Recognition Devices
- Dimmable LED for vehicle interiors
- Scanners and Handy Terminals
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Stage and Studio lighting
- LED Lighting PFCs, Linear Dimmable
