A6595KA-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.3Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Base Part Number | A6595 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 750mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 250mA |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 8 |
| Rds On (Typ) | 1.3 Ω |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.33mm |
| Length | 26.16mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
A6595KA-T Overview
As you can see, it's packaged in the way of a Tube.There is a package for it in the 20-DIP (0.300, 7.62mm) package.It has been mounted as Through Hole on the LED driver.There is a Latched Driver switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TA.There are 8 outputs available on this lighting driver.Operation is based on a supply voltage of 4.5V~5.5V.It produces a maximum output voltage of N-Channel volts at its maximum output.The A6595 family contains this object.In total, there are 20 terminations.The LED driver has 1 functions.This results in the maximum output current dropping to 750mA to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.Through Hole is mounted in the way.There are 20 pins in total on this board.Currently, the LED driving board has 1.3Ohm resistance.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 4.5V.It has a power supply of 5V.
A6595KA-T Features
Supplied from 5V
Resistance of 1.3Ohm
A6595KA-T Applications
There are a lot of Allegro MicroSystems A6595KA-T Power Switches ICs applications.
- Portable Video Game Players
- HDD, SSD
- Telecom and Network Systems
- Portable GPS Device
- Wireless Headsets
- USB Power Distribution
- Smartphone and PDA
- Wireless/Networking Cards
- USB Protection
- Notebook and Tablet Computers
