A6800SA-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6800 |
| Pin Count | 14 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | NPN |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Parallel |
| Output Configuration | Low Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Max Output Voltage | 50V |
| Switch Type | Latched Driver |
| Output Current per Channel | 600mA |
| Collector Emitter Voltage (VCEO) | 50V |
| Ratio - Input:Output | 1:1 |
| Collector Emitter Breakdown Voltage | 50V |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 1 |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 5.33mm |
| Length | 19.05mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6800SA-T Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the 14-DIP (0.300, 7.62mm) package.It has been mounted as Through Hole on the LED driver.There is a switch type of Latched Driver.It is recommended that the temperature be set to -20°C~85°C TA for reliable operation.The lighting driver has a total of 4 outputs that are available for use.Operation is based on a supply voltage of 3V~5.5V.The maximum output voltage is Bipolar volts.This object belongs to the A6800 family.It has a total of 14 terminations.The 14 pins are used for the operation of the system.It contains 1 functions.To meet the operation criteria, the maximum output current drops to 500mA.The supply voltage of 3.3V is conducive to high efficiency.In this case, it is mounted in the way of Through Hole.It is equipped with a total of 14 pins.In this case, the output current will be set to 600mA.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The Vsup value (maximum supply voltage) is set to 5.5V.Normal operation requires Vsup above 3V.It has a power supply of 3.3/5V.
A6800SA-T Features
Supplied from 3.3V
A6800SA-T Applications
There are a lot of Allegro MicroSystems A6800SA-T Power Switches ICs applications.
- Telecom and Network Systems
- Smart Phones, Feature Phones
- Portable Video Game Players
- Wireless Modem Data Cards
- Portable GPS Device
- Storage (HDDs, SSDs)
- Smartphone and PDA
- Notebook and Tablet Computers
- PC Card Hot Swap
- Portable Devices
