A6801SA-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 22-DIP (0.400, 10.16mm) |
| Number of Pins | 22 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | A6801 |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 600mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Parallel |
| Output Configuration | Low Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 1 |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 5.33mm |
| Length | 27.56mm |
| Width | 10.16mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6801SA-T Overview
It's?packaged?in?the way?of?a?Tube.It's included in the 22-DIP (0.400, 10.16mm) package.This lighting drivere has a mounting type of Through Hole.Latched Driver is the type of switch owned by it.Keeping the temperature at -20°C~85°C TA ensures reliable operation.There are 8 outputs available on this lighting driver.A voltage of 3V~5.5V is used to power it.A maximum voltage of Bipolar volts is available from the output of this LED driver.It comes under the family of A6801.A total of 14 terminations can be found in it.For operation, 22 pins are used.As far as the lighting driver is concerned, there are 1 functions.To comply with the operation criteria, the maximum output current is reduced to 600mA.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Through Hole.A total of 14 pins are present on it.This case results in a 600mA output current.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The maximum supply voltage for this LED driver is 5.5V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3V.In this case, the power supply is 3.3/5V.
A6801SA-T Features
Supplied from 3.3V
A6801SA-T Applications
There are a lot of Allegro MicroSystems A6801SA-T Power Switches ICs applications.
- PDAs
- Portable Video Game Players
- Solid-State Drives
- USB Protection
- Low Voltage I/O System Power
- PC Card Hot Swap
- Portable GPS
- Storage (HDDs, SSDs)
- Wearable Devices
- Hot Swaps
