A6801SEP-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6801 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 600mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Parallel |
| Output Configuration | Low Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 1 |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 4.57mm |
| Length | 11.51mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6801SEP-T Overview
Tube is the way it's packaged.There is a 28-LCC (J-Lead) package that includes it.This lighting drivere has a mounting type of Surface Mount.There is a Latched Driver switch type associated with it.It is recommended to set the temperature to -20°C~85°C TA in order to ensure reliable operation.It is possible to use 8 outputs in the lighting driver.The LED driving board is powered by a voltage of 3V~5.5V.A maximum voltage of Bipolar volts is available from the output of this LED driver.I believe it belongs to the A6801 family.It contains 28 terminations.28 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 600mA when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.It is mounted in the way of Surface Mount.A total of 28 pins are included in this LED driver.This case has the output current set to 600mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The Vsup value (maximum supply voltage) is set to 5.5V.A normal operation requires that the supply voltage (Vsup) remain above 3V.This part's power supply is 3.3/5V.
A6801SEP-T Features
Supplied from 3.3V
A6801SEP-T Applications
There are a lot of Allegro MicroSystems A6801SEP-T Power Switches ICs applications.
- Low Voltage I/O System Power
- USB Power Distribution
- Various applications equipped with buttons
- Mobile Communication Devices
- Wireless Modem Data Cards
- Wireless Headsets
- Hot-Swap Systems
- Gaming
- Handheld Devices
- USB3.1 Power Delivery
