A6801SEPTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BIMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Base Part Number | A6801 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 600mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Parallel |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 1 |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.57mm |
| Length | 11.51mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6801SEPTR-T Overview
A Tape & Reel (TR) is used to package it.It is included with the 28-LCC (J-Lead) package as well.Mounting type Surface Mount is selected for the LED driving board.The switch type is Latched Driver.To ensure reliable performance, the temperature should be set to -20°C~85°C TA.The LED driver is equipped with 8 outputs.Operation is based on a supply voltage of 3V~5.5V.It produces a maximum output voltage of Bipolar volts at its maximum output.It belongs to the family A6801.A total of 28 terminations can be found in it.The 28 pins are used to operate the LED driver.It has 1 functions.This results in the maximum output current dropping to 600mA to meet the operation criteria.Using a voltage of 3.3V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 28 pins.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3V.In this case, the power supply is 3.3/5V.
A6801SEPTR-T Features
Supplied from 3.3V
A6801SEPTR-T Applications
There are a lot of Allegro MicroSystems A6801SEPTR-T Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Portable GPS Device
- Portable/Handheld Devices
- USB Power Distribution
- Wireless/Networking Cards
- Portable Devices
- USB Protection
- Portable Music Players
