A6801SLW-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6801 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 600mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Parallel |
| Output Configuration | Low Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 1 |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6801SLW-T Overview
It is packaged in the form of a Tube.The 24-SOIC (0.295, 7.50mm Width) package includes it.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of Latched Driver.Keeping the temperature at -20°C~85°C TA ensures reliable operation.The lighting driver has a total of 8 outputs that are available for use.In order to operate, it requires a voltage supply of 3V~5.5V.It has a maximum output voltage of Bipolar volts.It comes under the family of A6801.It contains 24 terminations.It is necessary to use the 24 pins in order to operate the LED driver.The LED driver has 1 functions.The maximum output current is reduced to 600mA to meet the operation criteria.High efficiency is possible at 3.3V supply voltage.Surface Mount is mounted in the way.As a result, it has a total of 24 pins.The output current is set to 600mA in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In this case, Vsup (maximum supply voltage) is set to 5.5V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.A 3.3/5V power supply is used by the part.
A6801SLW-T Features
Supplied from 3.3V
A6801SLW-T Applications
There are a lot of Allegro MicroSystems A6801SLW-T Power Switches ICs applications.
- Portable GPS
- Wireless/Networking Cards
- USB Protection
- Wireless Headsets
- Handheld Devices
- Notebook and Tablet Computers
- Mobile Communication Devices
- Wearable Devices
- Portable Music Players
- PC Cards
