A6810EA-T
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6810 |
| Pin Count | 18 |
| JESD-30 Code | R-PDIP-T18 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/560V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 3mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:10 |
| Voltage - Load | 60V Max |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 10 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 5.33mm |
| Length | 22.86mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
A6810EA-T Overview
It's?packaged?in?the way?of?a?Tube.The 18-DIP (0.300, 7.62mm) package includes it.The lighting driver is mounted in the Through Hole position.It owns the Latched Driver switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The lighting driver is equipped with 10 outputs that can be used.It uses a supply voltage of 3V~5.5V to operate.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It comes under the family of A6810.It contains 18 terminations.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 40mA.Supply voltages of 3.3V allow for high efficiency.As a result, it is mounted in the manner of Through Hole.In total, it has 18 pins.There is a Display Drivers capacity container for this LED driver that is self-contained.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).Normal operation requires a voltage above 3V for the supply voltage.This part has a power supply of 3.3/560V.In addition, CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can be produced using this LED driving board.
A6810EA-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6810EA-T Applications
There are a lot of Allegro MicroSystems A6810EA-T Power Switches ICs applications.
- HDD, SSD
- Set-Top Boxes
- Portable Devices
- Smartphone and PDA
- Wireless Modem Data Cards
- Portable GPS Device
- Notebook PC
- Smart Phones, Feature Phones
- Wireless Headsets
- Portable/Handheld Devices
