A6810ELWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6810 |
| Pin Count | 20 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Output Voltage | 58.3V |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 0.3mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | TOTEM-POLE |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:10 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 10 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6810ELWTR Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 20-SOIC (0.295, 7.50mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is Latched Driver.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.By default, it is set to output 10.In order to operate, it requires a voltage supply of 3V~5.5V.A maximum output voltage of Bipolar volts can be achieved by this LED driver.It belongs to the family A6810.It contains 20 terminations.The 20 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.In order to meet the operation criteria, the maximum output current drops to 40mA.High efficiency is possible when the supply voltage is set to 3.3V.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 20 pins.As a result, the output current is set to 15mA.A self-contained LED driver with a capacity of Display Drivers is contained in an econtainer.In this case, the power supply is 3.3/5V.By using this lighting driver, it is also possible to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6810ELWTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6810ELWTR Applications
There are a lot of Allegro MicroSystems A6810ELWTR Power Switches ICs applications.
- Various applications equipped with buttons
- PDAs
- Handheld Devices
- Storage Drives
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Notebook and Tablet Computers
- HDD, SSD
- Solid State Drivers
- Hard Disk Drives
