banner_page

A6810ELWTR-T

3.3/560V Bipolar 1.27mm PMIC A6810 20 Pin 3.3V 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Allegro MicroSystems
  • Nocochips NO: 26-A6810ELWTR-T
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 687
  • Description: 3.3/560V Bipolar 1.27mm PMIC A6810 20 Pin 3.3V 20-SOIC (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2010
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Additional Feature CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
HTS Code 8542.39.00.01
Subcategory Display Drivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 1.27mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number A6810
Pin Count 20
Number of Outputs 10
Qualification Status Not Qualified
Output Type Bipolar
Max Output Current 40mA
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3/560V
Supply Voltage-Min (Vsup) 3V
Interface Strobe, Serial
Output Configuration High Side
Output Current 15mA
Voltage - Supply (Vcc/Vdd) 3V~5.5V
Supply Current-Max 3mA
Input Type Non-Inverting
Switch Type Latched Driver
Output Current per Channel 25mA
Ratio - Input:Output 1:10
Voltage - Load 60V Max
Supply Voltage1-Nom 60V
Number of Segments 10
Multiplexed Display Capability NO
Height Seated (Max) 2.65mm
Length 12.8mm
Width 7.5mm
RoHS Status ROHS3 Compliant

A6810ELWTR-T Overview


It is packaged in the manner of a Tape & Reel (TR).There is a 20-SOIC (0.295, 7.50mm Width) package that includes it.It has been mounted as Surface Mount on the LED driver.Latched Driver is the type of switch owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.As a default, the output is set to 10.In order to operate, it requires a voltage supply of 3V~5.5V.Voltage output is Bipolar volts at maximum.It belongs to the family A6810.It has a total of 20 terminations.For operation, 20 pins are used.It has 1 functions.To meet the operation criteria, the maximum output current drops to 40mA.High efficiency is possible when the supply voltage is set to 3.3V.The lighting driver is mounted in the direction of Surface Mount.This LED driver is equipped with a total of 20 pins.It is set to 15mA in this case.Self-contained LED driver with Display Drivers capacity in an econtainer.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).Normal operation requires a voltage above 3V for the supply voltage.A 3.3/560V power supply is used by the part.Using this LED driver, it is also possible to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.

A6810ELWTR-T Features


Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY

A6810ELWTR-T Applications


There are a lot of Allegro MicroSystems A6810ELWTR-T Power Switches ICs applications.

  • Smart Phones, Feature Phones
  • HDD, SSD
  • Hot Swap
  • Solid State Drivers
  • Storage Drives
  • Notebook PC
  • Hot Swaps
  • Set-Top Boxes
  • PC Cards
  • Gaming

Write a review

Note: HTML is not translated!
    Bad           Good