A6810KLWTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6810 |
| Pin Count | 20 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/560V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 3mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:10 |
| Voltage - Load | 60V Max |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 10 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
A6810KLWTR-T Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package 20-SOIC (0.295, 7.50mm Width).In this case, the LED driving board is mounted as Surface Mount.Latched Driver is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TA.By default, it is set to output 10.Operation is based on 3V~5.5V supply voltage.There is a maximum output voltage of Bipolar volts on this LED driver.I believe it belongs to the A6810 family.In total, there are 20 terminations.For operation, we use the 20 pins.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 40mA.High efficiency is possible when the supply voltage is set to 3.3V.The lighting driver is mounted in the direction of Surface Mount.A total of 20 pins are included in this LED driver.In this case, the output current is set to 15mA.A self-contained LED driver with a capacity of Display Drivers is contained in an econtainer.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 3V.A 3.3/560V power supply is used by the part.CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can also be produced by using this LED driver.
A6810KLWTR-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6810KLWTR-T Applications
There are a lot of Allegro MicroSystems A6810KLWTR-T Power Switches ICs applications.
- Notebook and Tablet Computers
- Wireless Headsets
- Portable/Handheld Devices
- Hard Disk Drives
- Storage Drives
- USB Protection
- Storage (HDDs, SSDs)
- USB Power Distribution
- Portable Video Game Players
- USB Power Distribution
