A6810SA-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6810 |
| Pin Count | 18 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Output Voltage | 58.3V |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/560V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:10 |
| Voltage - Load | 60V Max |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 10 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 5.33mm |
| Length | 22.86mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6810SA-T Overview
As a result, it is packaged in the form of a Tube.It is included with the 18-DIP (0.300, 7.62mm) package as well.The LED driver is mounted as Through Hole.Latched Driver is the switch type that it owns.Keeping the temperature at -20°C~85°C TA ensures reliable operation.It is possible to use 10 outputs in the lighting driver.Operation is based on 3V~5.5V supply voltage.Voltage output is Bipolar volts at maximum.This object belongs to the A6810 family.As a result, there are 18 terminations.It is necessary to use the 18 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 40mA when operation criteria are met.A supply voltage of 3.3V leads to high efficiency.The lighting driver is mounted in the way of Through Hole.18 pins are connected to it in total.When this is the case, the output current is set to 15mA.The LED driver is packaged in an econtainer with a capacity of Display Drivers.The Vsup value (maximum supply voltage) is set to 5.5V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.This part is powered by 3.3/560V.As well as producing CAN ALSO OPERATE WITH 5V LOGIC SUPPLY, this LED driving board is capable of producing [1].
A6810SA-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6810SA-T Applications
There are a lot of Allegro MicroSystems A6810SA-T Power Switches ICs applications.
- Hot Swap
- Wireless/Networking Cards
- Hot Swaps
- Smartphone and PDA
- PC Cards
- Telecom and Network Systems
- Solid-State Drives
- PC Card Hot Swap
- Notebook PC
- Various applications equipped with buttons
