A6810SLWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6810 |
| Pin Count | 20 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Output Voltage | 58.3V |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 0.3mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | TOTEM-POLE |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:10 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 10 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6810SLWTR Overview
It is packaged in the manner of a Tape & Reel (TR).There is a 20-SOIC (0.295, 7.50mm Width) package that includes it.The LED driver is mounted as Surface Mount.It owns the Latched Driver switch type.To ensure reliable operation, set the temperature to -20°C~85°C TA.There are 10 outputs available on this lighting driver.It uses a supply voltage of 3V~5.5V to operate.The maximum output voltage of this LED driver is Bipolar volts.I believe it belongs to the A6810 family.A total of 20 terminations can be found in it.It is necessary to use the 20 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 40mA in order to meet the operation requirements.A supply voltage of 3.3V leads to high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 20 pins are present on it.The output current is set to 15mA in this case.The LED driver is self-contained in an econtainer with Display Drivers capacity.3.3/5V is the power supply of the part.Using this LED driver, it is also possible to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6810SLWTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6810SLWTR Applications
There are a lot of Allegro MicroSystems A6810SLWTR Power Switches ICs applications.
- USB Power Distribution
- Mobile Communication Devices
- Notebook PC
- Portable GPS
- Portable Devices
- PC Card Hot Swap
- Hard Disk Drives
- HDD, SSD
- USB Ports/Hubs
- HDD and SSD
