Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-20°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
HTS Code |
8542.39.00.01 |
Subcategory |
Display Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
A6810 |
Pin Count |
20 |
Number of Outputs |
10 |
Qualification Status |
Not Qualified |
Output Voltage |
58.3V |
Output Type |
Bipolar |
Max Output Current |
40mA |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3.3/560V |
Supply Voltage-Min (Vsup) |
3V |
Interface |
Strobe, Serial |
Output Configuration |
High Side |
Output Current |
15mA |
Voltage - Supply (Vcc/Vdd) |
3V~5.5V |
Supply Current-Max |
3mA |
Input Type |
Non-Inverting |
Switch Type |
Latched Driver |
Output Current per Channel |
25mA |
Ratio - Input:Output |
1:10 |
Voltage - Load |
60V Max |
Supply Voltage1-Nom |
60V |
Number of Segments |
10 |
Multiplexed Display Capability |
NO |
Height Seated (Max) |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
A6810SLWTR-T Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a 20-SOIC (0.295, 7.50mm Width) package that includes it.A Surface Mount mounting is used for the LED driving board.It owns Latched Driver switch type.To ensure reliable performance, the temperature should be set to -20°C~85°C TA.There are 10 outputs available on this lighting driver.With a supply voltage of 3V~5.5V, the LED driving board operates.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It is a member of the A6810 family.The termination count is 20.In order to operate, the 20 pins are used.Currently, the lighting driver has a total of 1 functions.The maximum output current must drop to 40mA to meet the operation criteria.The supply voltage can be 3.3V for high efficiency.As a result, it is mounted in the manner of Surface Mount.20 pins are connected to it in total.As a result, the output current is set to 15mA.There is a Display Drivers capacity container for this LED driver that is self-contained.A maximum supply voltage of 5.5V is set in Vsup.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.In this part, the power supply is set to 3.3/560V.As a result of using this lighting driver, CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can also be produced.
A6810SLWTR-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6810SLWTR-T Applications
There are a lot of Allegro MicroSystems A6810SLWTR-T Power Switches ICs applications.
- Portable Video Game Players
- Low Voltage I/O System Power
- Portable Devices
- Mobile Communication Devices
- Portable/Handheld Devices
- HDD, SSD
- Smart Phones, Feature Phones
- PC Card Hot Swap
- Gaming
- Wireless/Networking Cards