A6812EEP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:20 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6812EEP Overview
It is packaged in the form of a Tube.There is a package for it in the 28-LCC (J-Lead) package.A Surface Mount mounting is used for the LED driving board.There is a switch type of Latched Driver.To ensure reliable operation, set the temperature to -40°C~85°C TA.As a default, the output is set to 20.Operation is based on 3V~5.5V supply voltage.It produces a maximum output voltage of Bipolar volts at its maximum output.As you can see, it comes from the A6812 family.There are 28 terminations in it.For operation, 28 pins are used.It consists of 1 functions.To meet the operation criteria, the maximum output current drops to 40mA.Using a voltage of 3.3V allows for high efficiency.Surface Mount is mounted in the way of this lighting driver.As a result, it has a total of 28 pins.As a result, the output current is set to 15mA.There is a Display Drivers capacity container for this LED driver that is self-contained.In this case, the power supply is 3.3/5V.The LED driver can also be used to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6812EEP Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812EEP Applications
There are a lot of Allegro MicroSystems A6812EEP Power Switches ICs applications.
- Portable GPS Device
- Portable GPS
- Wireless/Networking Cards
- Wearable Devices
- Portable/Handheld Devices
- PC Card Hot Swap
- Portable Devices
- Telecom and Network Systems
- Solid-State Drives
- Storage Drives
