A6812EEP-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:20 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 11.51mm |
| Width | 11.51mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6812EEP-T Overview
It is packaged in the manner of a Tube.Package 28-LCC (J-Lead) contains it.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is Latched Driver.Keeping the temperature at -40°C~85°C TA ensures reliable operation.In this LED driver, there are no outputs available.With a supply voltage of 3V~5.5V, the LED driving board operates.A maximum output voltage of Bipolar volts can be obtained with this LED driver.There is a A6812 family of things that it belongs to.It consists of 28 terminations in total.28 pins are used for operation.The LED driver has 1 functions.The maximum output current drops to 40mA in order to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.As a result, it is mounted in the manner of Surface Mount.The LED driving board is equipped with a total of 28 pins.The output current is set to 15mA in this case.There is a Display Drivers capacity container for this LED driver that is self-contained.In this part, the power supply is set to 3.3/5V.With this LED driver, CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can also be produced.
A6812EEP-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812EEP-T Applications
There are a lot of Allegro MicroSystems A6812EEP-T Power Switches ICs applications.
- Notebook and Tablet Computers
- Various applications equipped with buttons
- USB Ports/Hubs
- PDAs
- Set-Top Boxes
- Hot Swap
- Set-top-box
- HDD, SSD
- Wearable Devices
- Solid-State Drives
