A6812EEPTR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6812 |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-J28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Current - Output (Max) | 40mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:20 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 11.51mm |
| Width | 11.51mm |
| RoHS Status | Non-RoHS Compliant |
A6812EEPTR Overview
The package is in the form of a Tape & Reel (TR).In the 28-LCC (J-Lead) package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns Latched Driver switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.A voltage of 3V~5.5V is used to power it.A maximum voltage of Bipolar volts is available from the output of this LED driver.There is a A6812 family of things that it belongs to.It contains 28 terminations.It consists of 1 functions.There is a maximum output of 40mAV from the LED driver.The supply voltage can be 3.3V for high efficiency.28 pins are connected to it in total.The LED driver is packaged in an econtainer with a capacity of Display Drivers.3.3/5V is the power supply of the part.Using this LED driver, it is also possible to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6812EEPTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812EEPTR Applications
There are a lot of Allegro MicroSystems A6812EEPTR Power Switches ICs applications.
- PDAs
- USB Power Distribution
- Hot Swaps
- HDD and SSD
- Wireless/Networking Cards
- PC Card Hot Swap
- Portable Music Players
- Smart Phones, Feature Phones
- Wearable Devices
- Portable Video Game Players
