A6812EEPTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:20 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 11.51mm |
| Width | 11.51mm |
| RoHS Status | ROHS3 Compliant |
A6812EEPTR-T Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package 28-LCC (J-Lead).Surface Mount is the mounting type of the LED driver.The switch type is Latched Driver.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 20.A supply voltage of 3V~5.5V is required for it to operate.The maximum output voltage of this LED driver is Bipolar volts.It comes under the family of A6812.A total of 28 terminations have been found in it.During operation, the 28 pins are used.The LED driving board has a total of 1 functions.The maximum output current is reduced to 40mA to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.Surface Mount is mounted in the way.It is equipped with a total of 28 pins.The output current is set to 15mA in this case.There is a Display Drivers capacity container for this LED driver that is self-contained.A 3.3/5V power supply is used by the part.This LED driver can also produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6812EEPTR-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812EEPTR-T Applications
There are a lot of Allegro MicroSystems A6812EEPTR-T Power Switches ICs applications.
- Storage Drives
- HDD, SSD
- Portable GPS Device
- Storage (HDDs, SSDs)
- USB Protection
- Wearable Devices
- Wireless Headsets
- Gaming
- Handheld Devices
- PC Cards
