A6812ELW-T
| Parameters | |
|---|---|
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Output Voltage | 58.3V |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Max Output Voltage | 60V |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:20 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
A6812ELW-T Overview
It is packaged in the form of a Tube.In the 28-SOIC (0.295, 7.50mm Width) package, it is included.It has been mounted as Surface Mount on the LED driver.It owns the Latched Driver switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has 20 outputs.To operate, it needs a supply voltage of 3V~5.5V.A maximum voltage of Bipolar volts is available from the output of this LED driver.There is a A6812 family of things that it belongs to.It contains 28 terminations.The operation is performed through the 28 pins.The LED driver has 1 functions.The maximum output current is reduced to 40mA to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.This lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 28 pins.The output current is set to 15mA in this case.This LED driver is self-contained in an econtainer with a capacity of Display Drivers.The power supply of the part is 3.3/5V.Through the use of this lighting driver, we can also produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6812ELW-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812ELW-T Applications
There are a lot of Allegro MicroSystems A6812ELW-T Power Switches ICs applications.
- Hot-Swap Systems
- Notebook PC
- Solid-State Drives
- Portable Music Players
- USB Ports/Hubs
- Various applications equipped with buttons
- Notebook and Tablet Computers
- PDAs
- Wireless/Networking Cards
- Portable/Handheld Devices
