A6812ELWTR
| Parameters | |
|---|---|
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:20 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
A6812ELWTR Overview
Tape & Reel (TR) is the way it's packaged.It is included in the package 28-SOIC (0.295, 7.50mm Width).In this case, the LED driving board is mounted as Surface Mount.Latched Driver is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver has a total of 20 outputs that are available for use.The LED driving board operates with a supply voltage of 3V~5.5V.The maximum output voltage of this LED driver is Bipolar volts.It belongs to the family A6812.A total of 28 terminations have been recorded.The 28 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 40mA in order to meet the operation requirements.Supply voltages of 3.3V allow for high efficiency.The lighting driver is mounted in the direction of Surface Mount.There are 28 pins in total on this board.When this is the case, the output current is set to 15mA.This LED driver is self-contained in an econtainer with a capacity of Display Drivers.This part's power supply is 3.3/5V.CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can also be produced by using this LED driver.
A6812ELWTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812ELWTR Applications
There are a lot of Allegro MicroSystems A6812ELWTR Power Switches ICs applications.
- USB Power Distribution
- Wireless/Networking Cards
- Solid State Drivers
- Telecom and Network Systems
- USB Protection
- Smartphone and PDA
- PC Card Hot Swap
- Wireless Modem Data Cards
- Hot Swaps
- Wearable Devices
