A6812ELWTR-T
| Parameters | |
|---|---|
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:20 |
| Voltage - Load | 60V Max |
A6812ELWTR-T Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 28-SOIC (0.295, 7.50mm Width) package.Mounting type Surface Mount is selected for the LED driving board.The switch type is Latched Driver.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 20.It uses a supply voltage of 3V~5.5V to operate.A maximum voltage of Bipolar volts is available from the output of this LED driver.There is a A6812 family of things that it belongs to.In total, there are 28 terminations.It is necessary to use the 28 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 40mA to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.It is mounted in the way of Surface Mount.It is equipped with a total of 28 pins.This results in a 15mA output current.It is self-contained in an econtainer with a capacity of Display Drivers.It has a power supply of 3.3/5V.This LED driver can also produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6812ELWTR-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812ELWTR-T Applications
There are a lot of Allegro MicroSystems A6812ELWTR-T Power Switches ICs applications.
- Various applications equipped with buttons
- USB Power Distribution
- USB3.1 Power Delivery
- HDD and SSD
- Notebook and Tablet Computers
- Telecom and Network Systems
- PC Card Hot Swap
- Portable GPS
- PC Cards
- Low Voltage I/O System Power
