A6812KLWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:20 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
A6812KLWTR Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the 28-SOIC (0.295, 7.50mm Width) package.It has been mounted as Surface Mount on the LED driver.The switch type is Latched Driver.It is recommended to set the temperature to -40°C~125°C TA in order to ensure reliable operation.It is possible to use 20 outputs in the lighting driver.The LED driving board operates with a supply voltage of 3V~5.5V.A maximum output voltage of Bipolar volts can be achieved by this LED driver.As you can see, it comes from the A6812 family.A total of 28 terminations have been found in it.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 40mA in order to meet the operation requirements.Supply voltages of 3.3V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 28 pins are included in this LED driver.A container with a capacity of Display Drivers contains this self-contained lighting driver.This part's power supply is 3.3/5V.With this LED driver, CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can also be produced.
A6812KLWTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812KLWTR Applications
There are a lot of Allegro MicroSystems A6812KLWTR Power Switches ICs applications.
- Hot-Swap Systems
- Notebook and Tablet Computers
- Storage Drives
- Hard Disk Drives
- Smartphone and PDA
- PDAs
- Handheld Devices
- Wireless Headsets
- Wireless/Networking Cards
- Portable GPS Device
