A6812KLWTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:20 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
A6812KLWTR-T Overview
The package is in the form of a Tape & Reel (TR).Package 28-SOIC (0.295, 7.50mm Width) contains it.Mounting type Surface Mount is selected for the LED driving board.It owns the Latched Driver switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TA.As a default, the output is set to 20.Operation is based on a supply voltage of 3V~5.5V.It produces a maximum output voltage of Bipolar volts at its maximum output.It belongs to the A6812 family.It consists of 28 terminations in total.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 40mA in order to meet the operation requirements.The supply voltage can be 3.3V for high efficiency.As a result, it is mounted in the manner of Surface Mount.A total of 28 pins are present on it.A self-contained econtainer holding Display Drivers capacity contains this lighting driver.In this part, the power supply is set to 3.3/5V.With this LED driver, CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can also be produced.
A6812KLWTR-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812KLWTR-T Applications
There are a lot of Allegro MicroSystems A6812KLWTR-T Power Switches ICs applications.
- Handheld Devices
- Wireless Modem Data Cards
- HDD and SSD
- Wireless Headsets
- HDD, SSD
- Notebook PC
- Smartphone and PDA
- Low Voltage I/O System Power
- Hot Swap
- Portable/Handheld Devices
