A6812SEP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:20 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6812SEP Overview
Tube is the way it's packaged.Package 28-LCC (J-Lead) contains it.Mounting type Surface Mount is selected for the LED driving board.Latched Driver is the switch type that it owns.To ensure reliable operation, set the temperature to -20°C~85°C TA.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of 3V~5.5V.There is a maximum output voltage of Bipolar volts.I believe it belongs to the A6812 family.As a result, there are 28 terminations.In order to operate, the 28 pins are used.Currently, there are 1 functions associated with the lighting driver.To meet the operation criteria, the maximum output current drops to 40mA.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.Surface Mount is mounted in the way of this LED driving board.A total of 28 pins are included in this LED driver.The output current is set to 15mA in this case.A self-contained econtainer holding Display Drivers capacity contains this lighting driver.The power supply of the part is 3.3/5V.Through the use of this lighting driver, we can also produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6812SEP Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812SEP Applications
There are a lot of Allegro MicroSystems A6812SEP Power Switches ICs applications.
- Solid-State Drives
- Various applications equipped with buttons
- Hot Swap
- Storage (HDDs, SSDs)
- PDAs
- Portable Video Game Players
- Solid State Drivers
- Portable GPS
- Set-Top Boxes
- Handheld Devices
