A6812SEPTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6812 |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-J28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:20 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 11.51mm |
| Width | 11.51mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6812SEPTR Overview
It is package in Tape & Reel (TR) case.It is included in the package 28-LCC (J-Lead).This lighting drivere has a mounting type of Surface Mount.It owns Latched Driver switch type.In order to guarantee reliable performance, the temperature should be set to -20°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of 3V~5.5V.The maximum output voltage of this LED driver is Bipolar volts.This object belongs to the A6812 family.A total of 28 terminations have been recorded.It contains 1 functions.To comply with the operation criteria, the maximum output current is reduced to 40mA.With a supply voltage of 3.3V, high efficiency is possible.It is positioned in the direction of Surface Mount.It is equipped with a total of 28 pins.The LED driver is packaged in an econtainer with a capacity of Display Drivers.This part's power supply is 3.3/5V.Using this LED driver, it is also possible to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6812SEPTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812SEPTR Applications
There are a lot of Allegro MicroSystems A6812SEPTR Power Switches ICs applications.
- Low Voltage I/O System Power
- USB Protection
- Smartphone and PDA
- Set-Top Boxes
- Smart Phones, Feature Phones
- Gaming
- Wireless/Networking Cards
- Mobile Communication Devices
- Hard Disk Drives
- Solid-State Drives
