A6812SLW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:20 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6812SLW Overview
It is packaged in the form of a Tube.The 28-SOIC (0.295, 7.50mm Width) package includes it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of Latched Driver.Ensure reliable operation by setting the temperature to -20°C~85°C TA.The lighting driver has a total of 20 outputs that are available for use.A supply voltage of 3V~5.5V is required for it to operate.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It is part of the A6812 family of LED drivers.As a result, there are 28 terminations.During operation, the 28 pins are used.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 40mA in order to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.It is mounted in the way of Surface Mount.A total of 28 pins are present on it.The output current is set to 15mA in this case.A container with a capacity of Display Drivers contains this self-contained lighting driver.This part has a power supply of 3.3/5V.As a result of using this lighting driver, CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can also be produced.
A6812SLW Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812SLW Applications
There are a lot of Allegro MicroSystems A6812SLW Power Switches ICs applications.
- USB Power Distribution
- Smart Phones, Feature Phones
- PC Cards
- Portable Devices
- Wireless Headsets
- PDAs
- Hot-Swap Systems
- Handheld Devices
- Portable Music Players
- Storage (HDDs, SSDs)
