A6812SLWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:20 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6812SLWTR Overview
A Tape & Reel (TR) is used to package it.This package is included in 28-SOIC (0.295, 7.50mm Width).This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is Latched Driver.To ensure reliable operation, the temperature should be set to -20°C~85°C TA.The LED driver has 20 outputs.Operation is based on a supply voltage of 3V~5.5V.A maximum output voltage of Bipolar volts can be achieved by this LED driver.As you can see, it comes from the A6812 family.It contains 28 terminations.During operation, the 28 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 40mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 28 pins.This results in a 15mA output current.There is a Display Drivers capacity container for this LED driver that is self-contained.In this part, the power supply is set to 3.3/5V.Using this LED driver, it is also possible to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6812SLWTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812SLWTR Applications
There are a lot of Allegro MicroSystems A6812SLWTR Power Switches ICs applications.
- Hot Swap
- Notebook and Tablet Computers
- Hot Swaps
- HDD and SSD
- Solid State Drivers
- Notebook PC
- Storage (HDDs, SSDs)
- Gaming
- Wireless/Networking Cards
- Portable Music Players
