A6812SLWTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6812 |
| Pin Count | 28 |
| Number of Outputs | 20 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 6mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:20 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 20 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
A6812SLWTR-T Overview
Tape & Reel (TR) is the way it's packaged.It's included in the 28-SOIC (0.295, 7.50mm Width) package.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is Latched Driver.It is recommended that the temperature be set to -20°C~85°C TA for reliable operation.By default, it is set to output 20.The LED driving board is powered by a voltage of 3V~5.5V.Voltage output is Bipolar volts at maximum.It is a member of the A6812 family.As a result, there are 28 terminations.For operation, 28 pins are used.It has 1 functions.To meet the operation criteria, the maximum output current drops to 40mA.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way.A total of 28 pins are present on it.It is set to 15mA in this case.It is self-contained in an econtainer with a capacity of Display Drivers.This part has a power supply of 3.3/5V volts.This LED driver can also produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6812SLWTR-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6812SLWTR-T Applications
There are a lot of Allegro MicroSystems A6812SLWTR-T Power Switches ICs applications.
- Set-top-box
- Hot Swap
- Wireless/Networking Cards
- Various applications equipped with buttons
- Telecom and Network Systems
- USB Protection
- PC Card Hot Swap
- Portable Devices
- PC Cards
- Notebook PC
