A6818EEP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6818 |
| Pin Count | 44 |
| Number of Outputs | 32 |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:32 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6818EEP Overview
It is packaged in the form of a Tube.This file is included in package 44-LCC (J-Lead).The lighting driver is mounted in the Surface Mount position.A Latched Driver switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.It uses a supply voltage of 3V~5.5V to operate.The maximum output voltage is Bipolar volts.It belongs to the family A6818.The termination count is 44.The 44 pins are used to operate the LED driver.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 40mA.With a supply voltage of 3.3V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.As a result, it has a total of 44 pins.A container with a capacity of Display Drivers contains this self-contained lighting driver.This part's power supply is 3.3/560V.CAN ALSO OPERATE WITH 5V LOGIC SUPPLY can also be produced by using this LED driver.
A6818EEP Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6818EEP Applications
There are a lot of Allegro MicroSystems A6818EEP Power Switches ICs applications.
- Set-top-box
- Wireless/Networking Cards
- Portable GPS
- Notebook and Tablet Computers
- Portable GPS Device
- Various applications equipped with buttons
- Hard Disk Drives
- Portable Music Players
- Smartphone and PDA
- Set-Top Boxes
