A6818EEPTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6818 |
| Pin Count | 44 |
| Number of Outputs | 32 |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 9mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:32 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6818EEPTR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 44-LCC (J-Lead) package as well.It has been mounted as Surface Mount on the LED driver.It owns Latched Driver switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.With a supply voltage of 3V~5.5V, the LED driving board operates.There is a maximum output voltage of Bipolar volts on this LED driver.The A6818 family contains this object.A total of 44 terminations have been recorded.The operation is performed through the 44 pins.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 40mA.Supply voltages of 3.3V allow for high efficiency.It is mounted in the way of Surface Mount.This LED driver is equipped with a total of 44 pins.When this is the case, the output current is set to 15mA.Self-contained LED driver with Display Drivers capacity in an econtainer.The power supply of the part is 3.3/560V.Using this LED driver, it is also possible to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6818EEPTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6818EEPTR Applications
There are a lot of Allegro MicroSystems A6818EEPTR Power Switches ICs applications.
- USB Power Distribution
- Notebook and Tablet Computers
- Set-Top Boxes
- PC Card Hot Swap
- Wireless Headsets
- Storage (HDDs, SSDs)
- USB Power Distribution
- Hot Swap
- Portable GPS Device
- Portable Devices
