A6818KEPTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6818 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 9mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:32 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6818KEPTR Overview
The package is in the form of a Tape & Reel (TR).The 44-LCC (J-Lead) package includes it.This lighting drivere has a mounting type of Surface Mount.It owns the Latched Driver switch type.Keeping the temperature at -40°C~125°C TA ensures reliable operation.By default, it is set to output 32.A supply voltage of 3V~5.5V is required for it to operate.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It belongs to the A6818 family.A total of 44 terminations have been recorded.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 40mA to meet the operation criteria.The supply voltage can be 3.3V for high efficiency.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 44 pins.A self-contained container with a capacity of Display Drivers contains this lighting driver.This part's power supply is 3.3/560V.Through the use of this lighting driver, we can also produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6818KEPTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6818KEPTR Applications
There are a lot of Allegro MicroSystems A6818KEPTR Power Switches ICs applications.
- Portable/Handheld Devices
- PDAs
- USB3.1 Power Delivery
- Hot Swap
- PC Cards
- USB Ports/Hubs
- Gaming
- USB Power Distribution
- Handheld Devices
- Set-Top Boxes
